1506g 1506t 1506lv 1507g No Match file Solution

No Match file Solution

In this post, I’m going to share with you the solution to a very common error of a match file in Sunplus processor.

During upgrading of Sunplus 1506g 1506t 1506tv 1506f 1507g 1506lv 1506fv Receiver through USB we got a Very Common error of No Match file.

For removing that error we need to follow some tips which I’m sharing one by one below.

1 – Find the Costumer ID of The Current Software.

Every software has a different customer I’d of 12 digits which is located in the system information windows of the software.

To find out the customer I’d need to go to setting then version and then press 1502 code from our remote control. The customer I’d be visible on the screen.
This article you are reading on khan dish network.

No Match file Solution

2- matching of the Customer I’d.

In a second step, we need to match the current customer I’d to the new software customer I’d.

3- find out Costumer I’d In New Software.

We need to find out the customer I’d of the new software which we want to install
In our receiver.

4- Edit the Customer I’d through Hex Workshop.

To find the customer I’d in new software we will open the software ” which we want to install ” in hex workshop.
After that, on a computer or laptop we need to press the control+g button and in goto windows add the 1a000 address and hit enter.

No Match file Solution

If you did not find the id with the 1a000 Address then enter another address on the goto window ” 3fff6 ” or 5aff6 and click on the go button.

We’ll reach the right destination for the customer I’d.

Now we need to replace these 12 digits customer I’d with the currently installed software customer I’d in our receiver.
Edit carefully these 12 digits and click on the save button.

Now copy the new file you saved to your USB flash and go-to upgrade menu and install your software without any error.

4- for mobile users.

If you don’t have a laptop or computer to edit the software in hex, don’t worry you can also edit the software through the hex workshop by using your android phone.

5- hex editor for android or ios

You can find the hex editor in the play store for android, install the hex editor and open it.
And click on the open file and select the software that you want to install.

Now click on the external button

Now click on the following button and add the adress 1a000 and click on go to.

You will see the 12 digits customer I’d.

If you didn’t find that address try with another address of 3fff6 and click on goto.

After reaching the customer I’d now click on the edit button and add your current installed software customer Id.

And then click on the save button then click on yes and that’s it.

Now copy your new file to USB and install it without any error.

For more details watch the video